Ultrasonic Thickness Gauge with Enhanced Display – IC-TI-MVX

Note: This product requires probes to use, each sold seprately. Select the desired probes under Related Accessories

The CHECK-LINE model TI-MVX offers a series of advanced features including A-Scan, B-Scan as well as a complete alphanumeric datalogging system with storage capacity of thousands of data values and A-scan captures.
The TI-MVX features the highest resolution graphic LCD on the market and is especially engineered for optimal ease of use. It is supplied as a complete kit with all accessories in carrying case with FREE software, transfer cable and NIST-Traceable Calibration Certificate.Features: – Includes NIST-Traceable Calibration Certificate- CE Certified- The MVX is equipped with multiple viewing options to provide users with a complete set of inspection tools: (RF waveform, +/- Rectified waveform, Time based B-Scan, and Large Digits).- The A-Scan rectified mode is commonly used for detecting flaws/pits in pulse-echo mode and measuring through paint and coatings in echo-echo mode.- The time-based B-Scan feature of the MVX displays a cross section of the test material. It is commonly used to display the profile of the bottom surface of the test material.- Built in hardware AGC gain control for through paint measurements in multi mode operation.- The MVX has the ability to store 64 custom user defined setups. All factory setups can be selected, edited and saved to any setup location.- Use the visual alarm to set hi and lo limits for applications requiring specific tolerances. If the actual thickness value is above or below the limits, a red light is illuminated.- Use the find feature to locate the detection point, while automatically adjusting the display to bring the signal into view.- MVX also comes complete with our Windows PC software for transferring data to and from a PC.- Includes Flaw Inspection – Prove Up Mode, (special probe required)- The high speed scan feature speeds up the inspection process by making 32 measurements per second. Remove transducer from the tesst material, and display the minimum measurement scanned.- IP65 Rated

Specifications

– Range in Steel (Pulse-Echo Mode): Pit and Flaw detection measures from 0.63 to 254 millimeters (0.025 – 9.999inches)- Range in Steel (Echo-Echo Mode): Thru Paint & coatings measures from 2.54 to 102 mm (0.1 – 4.0 inches). Range will vary +/- depending on the thickness of coating.- Resolution: 0.001 inches (0.01mm)- Velocity Range: 0.0492 to 0.3936 in./ms. 1250 to 9999 meters/sec- Units: English & Metric- Transducer Types: Dual Element (1 to 10 MHz).- Memory: 16 megabit non-volatile ram- Memory capacity: 12,000 pages with 1 reading and waveform per page- Power Source:Three 1.5V alkaline or 1.2V NiCad AA cells- Battery Life: Typically operates for 150 hours on alkaline and 100 hours on NiCad- Auto Power off: if idle 5 min- Display: 1/8 in. VGA grayscale display 62 x 45.7mm- Keyboard: Membrane switch with twelve tactile keys- Case: Extruded aluminum body with nickel-plated aluminum end caps (gasket sealed).- Operating Temperature: -14 to 140 F (-10 to 60 C)- Weigth, net: 383 grams- Dimensions: 63.5 W x 165 H x 31.5 D mm- Warranty: 2 year limited- Certification: CE Approved, Factory calibration traceable to national standards